KnA Logo

Micro-E® Insulation Product Information

PRODUCT CODES: 4LMLT (trimmed), 4LMLS (staple flange)

PRODUCT DESCRIPTION & DIMENSIONS
Double sided scrimmed aluminum foil laminated to polyethylene foam (1/8" nominal thickness).
Edges can be trimmed or with staple flange.

WIDTH: 4'

LENGTH: 125' (stock size 4' width)

R-Value*: R-10 down; R-6 up; R-7 horizontal

PERM RATING: ASTM E-96 0.008

FLAME AND SMOKE: ASTM E-84 Flame spread <25 Smoke developed <50

EMITTANCE: ASTM C-1371 0.03

*R-value results are obtained from ASTM C236. Specific R-values for specific applications can be obtained from the Install Guide. To get a copy of the Install Guide, contact K'nA Distributors at 717-292-5448.

NOTE: Do not allow product to become damp or wet while rolled in sealed bag. Do not set product directly on wet or uncured concrete.

WARNING: Although ESP LOW-E® Insulation Products are all fire tested to ASTM and/or NFPA standards; it is recommended that they or any insulation material should not be exposed to open flame or other ignition sources of sufficient intensity during shipment, storage or installation.

CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources including overhead power lines. Carefully inspect electrical junction boxes and check for frayed wires before beginning installation.

Micro-E® Insulation is a versatile product for many applications and industries.