Low-E® Tab Material makes installing Low-E® Insulation in residential stud cavities as easy as can be. Low-E® Tab is cut to 16" or 24" on center so it can benefit commercial buildings, structures with radiant heating as well as residential applications.
The product is very easy to install and does not require special clothing or respirators to do so. The product is hypoallergenic and does not promote growth of mold or mildew.
PRODUCT CODES: 16EFEC, 24EFEC, 18EFEC
WIDTH: 16", 24", 18" respectively
LENGTH: 125' (16" & 24" widths) 100' (18" width)
R-Value*: R-11 down; R-7.55 up; R-7.75 horizontal
PERM RATING: ASTM E-96 0.008
FLAME AND SMOKE: ASTM E-84 Flame spread <25 Smoke developed <50
EMITTANCE: ASTM C-1371 0.03
*R-value results are obtained from ASTM C236.
Specific R-values for specific applications can be obtained from the Install Guide.
To get a copy of the Install Guide, contact K'nA Distributors at 717-292-5448.
NOTE: Do not allow product to become damp or wet while rolled in sealed bag. Do not set product directly on wet or uncured concrete.
WARNING: Although ESP LOW-E® Insulation Products are all fire tested to ASTM and/or NFPA standards; it is recommended that they or any insulation material should not be exposed to open flame or other ignition sources of sufficient intensity during shipment, storage or installation.
CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources including overhead power lines. Carefully inspect electrical junction boxes and check for frayed wires before beginning installation.
Low-E® Tab Insulation is a versatile product for many applications and industries.
Ok, you have read about the product… Would you like to find out the cost? Fill out the form below and you will see prices immediately. Within 24 hours, you will receive an email with a formal quote reflecting any volume discounts and the true shipping costs.