Low-E® Insulation can be used in all facets of the building industry where conventional insualtions are used. IT can be used alone or in conjunction with mass insulations for high R-system.
From large commercial buildings, light guage steel to post frame structures, Low-E® can be used to save money on heating and cooling costs. Low-E® Insulation is easy to handle and will not tear or puncture easily. It is flexible and seals tight around fasteners. With our Foil or White Foil facings and our EZ Seal Tab, Staple Flange or Trimmed edges to go with them, we have the products to make your building as energy efficient as possible while promoting a healthier indoor environment.
PRODUCT CODES: 4LFLT, 6LFLT (trimmed), 4LFLS, 6LFLS (staple flange)
PRODUCT DESCRIPTION & DIMENSIONS -
Double sided scrimmed aluminum foil laminated to polyethylene foam (1/4" thickness).
Edges can be trimmed or with staple flange.
WIDTH: 4', 6' respectively
LENGTH: 125' (stock size 4' width), 84' (stock size 6' width)
R-Value*: R-11 down; R-7.55 up; R-7.75 horizontal
PERM RATING: ASTM E-96 0.008
FLAME AND SMOKE: ASTM E-84 Flames spread <25 Smoke developed <50
FULL SCALE FIRE TEST: NFPA-286 Passed
EMITTANCE: ASTM C-1371 0.03
*R-value results are obtained from ASTM C236.
Specific R-values for specific applications can be obtained from the Install Guide.
To get a copy of the Install Guide, contact K'nA Distributors at 717-292-5448.
NOTE: Do not allow product to become damp or wet while rolled in sealed bag. Do not set product directly on wet or uncured concrete.
WARNING: Although ESP LOW-E® Insulation Products are all fire tested to ASTM and/or NFPA standards; it is recommended that they or any insulation material should not be exposed to open flame or other ignition sources of sufficient intensity during shipment, storage or installation.
CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources including overhead power lines. Carefully inspect electrical junction boxes and check for frayed wires before beginning installation.
Low-E® Insulation is a versatile product for many applications and industries.
Ok, you have read about the product… Would you like to find out the cost? Fill out the form below and you will see prices immediately. Within 24 hours, you will receive an email with a formal quote reflecting any volume discounts and the true shipping costs.